This paper model is Samaritan Revolver, Hellboy’s weapon, based on the Hellboy comic and film, the papercraft is created by UHU You can download this. This is the Samaritan gun, the big-barreled shooter that Hellboy uses only after muttering Samaritan Gun Papercraft [Way Nifty via ToyCyte]. We thought HAL was pretty cool, but this papercraft model of Hellboy’s Good Samaritan is ridiculously detailed, down to the hammer, cylinder and.
||3 April 2007
|PDF File Size:
|ePub File Size:
||Free* [*Free Regsitration Required]
The whole lower section of the frame right to the back near the handle is pretty much solid laminated cardboard.
Samaritan-Gun Hellboy Revolver Papercraft
A superglue accelerator is also usful, but not hugely important. Finally, a glaze a semi-transparent mix of matt varnish, black and blue paint was slopped on and wipped away untill I was happy with the overall tone. I tend to use the wet and dry type. The rest of the build has gone relatively smoothly so far, don’t papercfaft to bevel the edges of the outer barrel pices so they fit nice and tight together.
The kit comes with a printed liner, but of course I wanted proper rifling, so I cut some thin card into strips an applied the to the printed part. The techniques used in this thread ore not traditional card modelling techniques, but rather show how I build a card model using the design as basis for a much stronger and hopefully more realistic version.
Login to remove ads.
I’m about as far as I can go until the weather clears up a bit. Anyhoo, after the rather happy way the colt is turning out, I’ve decided to go for something even chunkier, in the manner of UHU02’s Hell Boy Samaritan Gun. I guess it was attempt to keep myself, my brother and cousin occupied while she took care of us after school. This is the basic plan for all parts, but you will need to heplboy ahead, and subtract a bit from many parts to allow for the thickness of card on other edges.
Okay, in the tradition of all things card ppapercraft, I’m going to start a new project before I finish the last one see nothings colt navy build thread Firstly, I painted the whole grip a nice orangey brown Then I mixed up a glaze of dark purply red brown, and applied it hellbboy my trusty demented spider brush in a deliberatly streaky manner a glaze is a mix of paint and varnish to make a semi-tranparent goo.
The Round ‘Recoil damper” is done just like the ring earlier, only longer. The hammer is nearly done, I used a different card for this as it was a bit more flexible than the 1mm stock I use for most things, and it seems to be working well around the bendy bits. I was never really great at papercrafts. Now, I mentioned earlier that large quantities of superglue are required for this type of construction.
D I’m in law enforcement, and if I didn’t know better, I’d say that thing was the real article! Which is shame, ‘cos i thought it was cool.
Bullets And Paper Cuts: Hellboy’s Samaritan – Geekologie
Page 1 of 4. Anyways, this goes a little bit beyond cranes and hearts. I’ve altered the method of anchoring the grip because it suited the materials I’m using, not because the suggested method is bellboy. I don’t think I’ve ever seen a cardmodel turned into something so fantasticly detailed and so apparently real!
Next picture shows a couple of additions to the basic model, that are aesy to add and easily visible in photo’s of the real one. Find all posts by mousemuffins. With each new set comes another opportunity to go on the hunt, to be the first to blind box a chaser or variant and if nothing else but for the thrill of opening just one more box….
Hellboy – Samaritan Revolver Free Paper Model Download
This all fell in a heap of course when I discovered my barrel wouldn’t fit. I’ve left the ends of the overlapping parts of the rifling loose so the can be glued over the seam when the rest of the liner is dry.
I mean, who takes the time to create gun replicas out of paper? Something the instructions would have you do is leave one side of the frame loose so you can fit a retaining pin inside and then close it up. And make it look more like this: Find all posts by ThunderChild. Smells a bit though.
Don’t ever carry that through an airport. Still, I can start laminating my Thompson. Firstly, the major parts, all undecoated black. Firstly, and simply, a couple of bars running down each side under the barrel. Very impressive project MM, and a nicely detailed build thread! Next trick it to cut out your first pieces, trace around them, cut out the new piece 1mm inside the line, and glue it to the first.
The site is translated from Japanese pretty funny to just read googles translation so good luck.
Send a private message to Plastic Bonsai. The time now is Pre mixed waterbased wood putty. I like big guns. I’ve stippled on a layer a gunmetal colour mixed with Citadel Chaos Black and Boltgun metal. Cheapest you can get.
A trick for cutting such heavy laminations is to cut one layer at a time, stick it to the next layer and use it as a template to cut the next layer. Some blue Regal blue, in this case and a touch more black was added and the process repeated, a bit less intensly than the first two layers, but evening out the colour a bit more. Send a private message to mousemuffins. The next part worries me a bit, as its supposed to support the locking mechanism at the rear.
Hellgoy all posts by jparenti. I have not seen you. While I’m waiting for the cylinder to set up, I’ve started on the frame.
It is really fantastic. BB code is On.